This week I’ve finished the iconic Railfreight class 47 workhorse, and it’s ready to enter service on Farkham.
The base model for this loco project is a Bachmann 47301, part number 31-655. The loco is already in Railfreight Red Stripe, but there are some differences that needed to be addressed first.
Once the body was separated from the chassis, I removed the orange cantrail stripe, white body side stripe, numbers and the BR double arrows. I do this by placing the body in an old baking tray, and spraying oven cleaner onto the unwanted livery details. After 20 minutes, I repeat the process and after a further 20 minutes I rinse the oven cleaner off the model. Under warm water, the printed details can be easily scratched of with a thumbnail without affecting the paint work. It basically softens the factory printed details.
The red stripe on 47 363 was only present on the grey bodyside, so I set to removing it from the yellow cabsides with a cotton bud and T-Cut.
One of the initial attractions to modelling this class 47, was the black faded numbers present on the body sides. Plenty of thought went into how I would recreate this feature, but I decided to use a sign writing vinyl cutter to make a stencil and spray the numbers. I then used a fine sanding stick to flat the painted numbers back, fading them like the prototype. The windows and cab interiors were then removed and a coat of acrylic gloss varnish was airbrushed over the model ready for transfers.
I used Railtec Transfers, which I highly recommend when using acrylic paints and varnishes. The numbers, BR double arrows, kingfishers and white cantrail stripes were all applied before a coat of matt varnish.
The glazing and cab interiors were refitted to the body. Smiths screw link couplings and bufferbeam detailing were added before the body was reunited with the chassis. The marker light panels were flooded with thinned matt black paint before my thoughts turned to weathering.
I usually like to combine a range of techniques, depending on the look of the prototype. Starting with the airbrush, a dusting of Railmatch Frame Dirt was applied to the chassis and lower bodysides. The roof had a coat of Railmatch Roof Dirt and the exhaust port received some matt black.
Next I applied Flory Models washes, starting with Dark Dirt to the roof. Using a flat brush in a downward direction and wiping the excess off with a damp sponge, again in a downward motion. To fade the bodysides, I used the white wash in the same way. Dark Dirt was then applied again where the oily deposits run down the body.
Overall, I’m quite pleased with how this project has turned out, and 47 363 is now ready to be put into revenue earning service on Farkham.